|
|
 |
|
Eng. Size |
# of Cyl. |
Stroke |
Rod Size |
Main Size |
# of Mains |
Engine Model * Forging #’s * Information |
# of lbs. |
Part # w/o bearings |
Part # w/ bearings |
|
|
PERKINS |
|
104 |
4 |
3.94 |
2.046 |
2.676 |
5 |
Model 104-22 – Shibaura engine
Forg # 2T, P770 |
48 |
1616 |
|
|
99 107 |
4 |
3.50 |
2.000 |
2.248 |
3 |
Model # C99, MD4/107, 4-99, 4-107, 4-108
Forg # 22922Z3UGSB, 0260086 |
50 |
7406 |
7406B |
|
144 152 |
3 |
5.00 |
2.249 |
2.749 |
3 |
Model # P31, 3-144, 3-152, MF-20, MF-35,
MF-40, MF-50, MF-135, MF-150
This application is for crankshaft with rope-type rear seal and smooth (no splines) neck.
(See also part #’s 7418, 7427, & 7424.) |
51 |
7404 |
7404B |
|
144 152 |
3 |
5.00 |
2.249 |
2.749 |
3 |
Model # P31, 3-144, 3-152, MF-20, MF-35,
MF-40, MF-50, MF-135, MF-150
Forg # 3132700 This application is for crankshaft with lip-type rear seal and smooth (no splines) neck.
(See also part #’s 7404, 7427 & 7424.) |
51 |
7418 |
7418B |
|
144 152 |
3 |
5.00 |
2.249 |
2.749 |
3 |
Model # 3-144, 3-152 Crankshaft has splined neck and rope type rear seal surface.
(See also part #’s 7404, 7418, & 7424.) |
44 |
7427 |
7427B |
|
144 152 |
3 |
5.00 |
2.249 |
2.749 |
3 |
Model # 3-144, 3-152 Crankshaft has splined neck and lip-type rear seal surface.
(See also part #’s 7404, 7418, & 7424.) |
44 |
7424 |
7424B |
|
154 |
4 |
4.00 |
2.249 |
2.499 |
5 |
Model # 4-154 used in Yale fork lifts
Crankshaft has splined neck and rope type seal surface on the rear. |
52 |
7422 |
|
|
|
|
|
|
|
|
Model # 4-154 Series 200 Perkins engine used in 843 Bobcat. Crankshaft has smooth neck and lip tip seal surface on the rear. |
52 |
7430 |
|
|
192 203 |
4 |
5.00 |
2.249 |
2.749 |
5 |
Model # 4-192, 4-203
Forg # 31315127, 3135148 - Smooth neck
(no splines) with rope-type rear seal.
See also part #’s 7420, 7414 & 7426. |
56 |
7405 |
7405B |
|
192 203 |
4 |
5.00 |
2.249 |
2.749 |
5 |
Model # 4-192, 4-203 For spline neck application with rope-type rear seal.
See also part #’s 7405, 7414 & 7426. |
56 |
7420 |
7420B |
|
192 203 |
4 |
5.00 |
2.249 |
2.749 |
5 |
Model # 4-192, 4-203 Forg # 31315871
For spline neck application with lip-type rear seal surface. See also part #’s 7405, 7420 & 7426. |
56 |
7414 |
7414B |
|
192 203 |
4 |
5.00 |
2.249 |
2.749 |
5 |
Model # 4-192, 3-203 Forg # 3135148
For smooth (no splines) neck applications with lip type rear seal surface. See also part #’s 7405, 7420 & 7414. |
56 |
7426 |
7426B |
|
236 248 |
4 |
5.00 |
2.499 |
2.999 |
5 |
Model # 4-236, 4-248 Forg # 31315881, 31315910 - Rope-type rear seal. |
75 |
7408 |
7408B |
|
236 248 |
4 |
5.00 |
2.499 |
2.999 |
5 |
Model # 4-236, 4-248 Forg # 31315980, 31315870 For crankshaft with lip-type rear seal. |
75 |
7416 |
7416B |
|
236 248 |
4 |
5.00 |
2.499 |
2.999 |
5 |
Model # 4-236, 4-248 Forg # 3131599F
This crankshaft has 3 bolt holes in top of neck.
Flywheel flange has 6 bolt holes and one dowel pin hole. |
75 |
7429 |
7429B |
|
318 |
4 |
5.00 |
2.749 |
2.999 |
5 |
Forg # 31315971 For crankshaft with lip-type rear seal and splined neck. |
78 |
7417 |
7417B |
|
354 |
6 |
5.00 |
2.499 |
2.999 |
7 |
Model # 6-354 Forg # 11010429
For application with lip-type rear seal. |
95 |
7402 |
7402B |
|
354 |
6 |
5.00 |
2.499 |
2.999 |
7 |
Model # 6-354 Forg # 31322302, 31323301
For application with rope-type rear seal. |
95 |
7407 |
7407B |
|
354 |
6 |
5.00 |
2.499 |
2.999 |
7 |
Model # 6-354 Forg # 31323320, 3280
This crankshaft has 3 bolt holes in top of neck. |
78 |
7421 |
|
|
|
|
 |
