Crankshaft Welding Supplies


December 1, 2008, 11:48 am



			About Us


			Products


			Connecting Rod Catalog


			Crankshaft Kit Catalog


			Crankshaft Welding Supplies


			Antique & Obsolete Crankshafts

WELDING WIRE

PART #	DESCRIPTION	UNIT	PRICE PER LB.
52WF	.035" Wire for cast & mild steel	44 lbs	2.18
53WF	.030” Wire for cast	30 lbs.	2.49
59P	.035” Wire for steel applications	33 lbs.	3.22

Welding wire is packaged on spools of 44 lbs. each. Actual shipping weight with spool is 48 lbs.

Some welding wire may be packaged on 33 lb. or 30 lb. spools. Actual shipping weight is 36 lbs. or 33 lbs.

WELDING FLUX

PART #	DESCRIPTION	UNIT	PRICE PER LB.
67L	Flux for mild steel	50 lbs.	1.61
58S	Flux for cast	50 lbs.	3.45
55S	Neutral flux	50 lbs.	5.72
45L	Flux for hard surface	50 lbs.	2.54
66S	Flux for extra hard surface	60 lbs.	3.28

Welding flux is packaged in pails of 50 lbs. each. Actual shipping weight with pail is 53 lbs., except for 66S, which is packaged in a 60 lb. pail with a shipping weight of 63 lbs.

PART #	COMMON USAGE

52WF	Good economical wire for use on cast iron or steel shafts where no additional alloying is necessary.
53WF	Same uses as 52WF but in a smaller diameter for less heat build up and weld deposit.
59P	High alloy wire for use on heavy duty applications such as diesel engine crankshaft journal surfaces and industrial applications.
67L	A neutral non alloying flux generally used for mild steel applications.
58S	Specially manufactured flux for use with both cast iron and mild steel applications. Most commonly used with 52WF and 53WF wire but not restricted to them. It is our most popular flux because of its wide range of uses.
45L	Hard surface flux for use on heavy duty applications. Commonly used on diesel crankshafts.
66S	Used in heavy duty industrial applications or roller surfaces that require abrasion resistance and/or greater hardness than can be achieved with 45L flux.

Prices are F.O.B. Charlotte, NC and subject to change without notice.

STANDARD CRANKSHAFT COMPANY provides wire and flux products that combine to provide weld deposit in a wide range of hardness from ductile to 400 series stainless. By using these products in various combinations you should be able to meet any crankshaft welding need. These same products can be used for welding an infinite number of unrelated parts in need of buildup repair. Examples given on this sheet are common usage in Automotive Machine Shops that employ a crankshaft welder and grinder.

To Order Call 1-800-334-1299